Process Flow
Equipment / System Architecture
Related project: Foshan Waste Aluminum Recycling & Ingot Production Project
Separate from general ferrous scrap
Copper conductors, aluminum scrap, alloys, coatings, oils and attachments require controlled sorting and a product-specific route.
Process options
Cable stripping or granulation, magnetic and density separation, copper and aluminum preparation, melting and refining interfaces, ingot or anode casting, electrorefining interfaces, dust and flue-gas treatment, dross and residue handling.
Preliminary Capacity & Technical Specification Range
| Typical configurable capacity | 0.3–20 t/h for sorting/preparation; melting/refining capacity is designed separately |
|---|---|
| Feed basis | Cable/conductor/alloy grade, coating, oil, attachments, dimensions and target copper/aluminum product |
| Typical outputs | Clean copper/aluminum fractions, granules, cathode/ingot where the selected refining route is included |
| Key utilities | Power, compressed air, water and route-specific furnace/emission systems |
Required for quotation: representative photos and samples, minimum/normal/peak feed quantity, composition and contamination analysis, operating hours, desired products and sizes, local emission/discharge limits, utilities, plot plan and required automation.
Copper and Aluminum Feedstock, Processing and Product Equipment
Request a Project Evaluation
Share representative waste characterization, throughput range, required outputs, utilities, site constraints and compliance requirements.
Start the engineering evaluation