Waste Glass Recycling – China Bente Industry Group

Waste Glass Recycling feedstock process and equipment visual — Waste glass: feedstock, processing and cullet. Mixed waste glass and broken glass are received, crushed and separated into clean, size-controlled cullet fractions.

Process Flow

Controlled ReceptionSorting by Glass TypeRemoval of Metals, Plastics, Ceramics and StonesPrimary CrushingLaminated-glass Interlayer Separation where requiredSecondary CrushingScreening and Air SeparationCullet Quality ControlCovered Product Storage

Equipment / System Architecture

Receiving

Sorting conveyors

Crusher

Screen

Magnetic

Air separation

Feedstock Classification

Automotive laminated glass, flat architectural glass and container glass are received and characterized separately. Ceramics, stones, metals, plastics, coatings, mirror backing and moisture determine sorting and product quality.

Processing Route

Controlled receiving → sorting by glass type → removal of metals, plastics, ceramics and stones → primary crushing → laminated-glass interlayer separation where required → secondary crushing → screening and air separation → cullet quality control → covered product storage.

Main Equipment

Receiving and sorting conveyors, crusher, screen, magnetic and air separation, laminated-glass interlayer separation, dust collection, optional washing and water recirculation, cullet silos or storage bays.

Preliminary Capacity & Technical Specification Range

Typical configurable capacity	1–30 t/h
Feed basis	Automotive laminated, flat or container glass; ceramic/stone, metal, plastic, coating and moisture content
Typical outputs	Screened cullet fractions, separated metal/plastic and recovered PVB where technically required
Key utilities	Power, dust collection and optional process-water recirculation

Required for quotation: representative photos and samples, minimum/normal/peak feed quantity, composition and contamination analysis, operating hours, desired products and sizes, local emission/discharge limits, utilities, plot plan and required automation.

Waste Glass Recycling: Before, Processing and After

Before: Mixed waste glass bottles and broken glass with possible impurities.
Processing: Crushing, conveying, magnetic separation and other contaminant-removal steps selected for the verified feed.
After: Clean, screened glass cullet for glassmaking, construction aggregate or landscaping filler, subject to product testing.

Mixed waste glass bottles and broken glass before processing, with possible plastic, stone and metal contamination — Before Input: Raw Waste Glass Before Processing

Waste glass during crushing and conveying in the recycling production line — Processing: Waste Glass Crushing, Conveying and Separation

Clean, screened and size-controlled recycled glass cullet after processing — After Output: Clean Recycled Glass Cullet

Request a Project Evaluation

Share representative waste characterization, throughput range, required outputs, utilities, site constraints and compliance requirements.

Start the engineering evaluation