Feed Preparation
Receiving, storage, controlled feeding, sorting, dust removal, cutting, cleaning and conditioning.
AGRICULTURAL WASTE · RESOURCE RECOVERY · PULP & PAPER
Thailand — 5 t/h Waste Straw-to-Pulp Project
Engineering route for converting waste straw and related agricultural fibrous residues into pulp for a defined paper or paperboard production interface.
Published project basis: Thailand · 5 t/h · waste straw to pulp.
Process Route
Straw ReceptionSorting / Dust RemovalCutting / Size ReductionWashing / ConditioningPulping RoutePulp WashingScreening / CleaningStock PreparationPulp Storage / DewateringPaper / Paperboard Interface
The exact preparation, pulping, washing and recovery configuration is confirmed from representative straw analysis, pulp requirements, water balance, utilities and environmental limits.
Confirmed Design Basis and Required Inputs
| Project location | Thailand |
|---|---|
| Published capacity | 5 t/h |
| Feedstock | Waste straw / agricultural fibrous residue |
| Product route | Pulp for an agreed paper or paperboard production interface |
| Parameters requiring confirmation | Fiber and ash analysis, moisture, contamination, required pulp properties, water quality, utilities, wastewater standard and site boundary |
Main Engineering Scope
Pulping and Washing
Project-specific pulping route, pulp washing, screening, cleaning, stock preparation and intermediate storage.
Environmental Systems
Process-water circulation, liquor separation, wastewater treatment, odor and residue management according to the approved process.
Automation and Utilities
Drives, instrumentation, PLC/HMI or SCADA, steam or thermal interfaces, process water, compressed air and electrical distribution.
Thailand 5 t/h Project Media
Frames extracted from the five project videos supplied by the owner. They document the line equipment, feed handling and operating environment.
Frequently Asked Questions
Which raw materials can be evaluated?
Waste straw and similar agricultural fibrous residues can be evaluated after representative feedstock inspection and testing.
What is the stated capacity for this project?
The owner-provided project basis is 5 tonnes per hour for the Thailand waste-straw-to-pulp project.
Can the pulp feed a paper or paperboard line?
Yes. The pulp preparation and storage interface can be developed for a defined downstream paper or paperboard process. Final pulp specification must be agreed first.
Is one pulping route suitable for every straw type?
No. Fiber condition, silica, ash, moisture, contamination and the required pulp properties determine the preparation and pulping route.
What customer data is required?
Representative raw-material samples, hourly and seasonal quantities, required pulp or paper product, water quality, utilities, site information and local discharge requirements are required.
How are water and process liquor handled?
Water circulation, washing stages, liquor separation and wastewater treatment are designed from the selected process and the applicable discharge or reuse standard.
Can the line include automatic control?
Yes. Conveying, dosing, tanks, pulp transfer, washing, screening and utility systems can be integrated with PLC/HMI or SCADA according to the project boundary.
Are yield and chemical consumption fixed on this page?
No. Yield, chemical consumption, utilities and final pulp quality require feedstock testing and an approved process basis.
Evaluate a Straw-to-Pulp Project
Provide the straw type, representative analysis, required pulp or paper product, capacity, site, utilities and environmental standard.
Request Project Evaluation →