Straw / Bagasse to Pulp & Paper: Processing Equipment
Process Flow
Equipment / System Architecture
Suitable straw, bagasse and plant fibers are prepared for dedicated pulp, molded-fiber, paper or board production. Fiber testing determines the pulping route, yield, product grade and wastewater treatment.
Raw Materials
Verified straw, bagasse and suitable plant fibers, inspected for moisture, ash, silica and contaminants.
Finished Products
Pulp, molded-fiber products, paper or board to the agreed buyer specification.
Preliminary Capacity & Technical Specification Range
| Typical configurable capacity | 5–150 t/day dry fiber feed; final line size depends on fiber yield, moisture and paper/board grade |
|---|---|
| Feed basis | Straw, bagasse or plant-fiber species, moisture, ash, silica, fiber length, contaminants and seasonal supply |
| Typical outputs | Pulp, molded fiber, paper or board; final basis weight and quality are confirmed by trials |
| Key utilities | Power, process water, steam or thermal drying, wastewater treatment and dust control |
Required for quotation: representative photos and samples, minimum/normal/peak feed quantity, composition and contamination analysis, operating hours, desired products and sizes, local emission/discharge limits, utilities, plot plan and required automation.
Request a Project Evaluation
Share representative waste characterization, throughput range, required outputs, utilities, site constraints and compliance requirements.
Start the engineering evaluation